Radar processing

Radar processing

Thruput manufacture radar data processing components for use in recording and wind farm clutter mitigation solutions, as well as the custom hardware environment for the EUROCONTROL CIMACT system.

Description

Description

High reliability
Minimum heat output
Minimum power consumption
Silent operation
Compatibility with ASTERIX radar data formats

Radar Processing Equipment

Function	From	To	Product	Model
Calibrate	Offset Radar test targets		In this case, the unit is in parallel to the forward path of the data, so it has no impact on any existing equipment. On receipt of the SSR monitor target message, its position is sampled. If correct, the test target message is re-generated with an offset in range and bearing, to bring it within the visible ATC display area.	GF RADIX RCAL
Combine	ASTERIX	ASTERIX	Multiple inbound radars are copied and combined using OR gates based on user-defined geographic areas. Data output has new SIC and SAC codes.	GF RADIX RDFC
Concentrate	ASTERIX	ASTERIX	Multiple inbound radars concentrated onto a single LAN or serial output, whilst maintaining channel identity.	GF RADIX RDFC
Convert	Serial	LAN	For each inbound radar, the unit will unwrap and reformat each packet of data. The system supports: Serial to LAN conversion LAN to serial conversion	GF RADIX RDFC
Mitigate	ASTERIX	ASTERIX	An inbound radar is copied and sampled to identify and remove clutter targets arising within user defined geographic areas, whilst leaving valid targets unaffected. The data output has new SIC and SAC codes.	GF RADIX DCMS
Render	ASTERIX Radar data		Multiple inbound radars concentrated onto a single display screen, and rendered with a local airspace map. Because the solution is purely hardware, it is intended for a straightforward passage through the SARG safety case approvals process.The unit is controlled from a simple console-mounted panel, in which user commands are selected by physical push button or rotary switches.	GF RADIX RDS
Render	ASTERIX Radar data		The Eurocontrol CIMACT hardware environment is based on Customised COTS (C.COTS) components. All candidate components are individually tested within the CIMACT reference system to ensure compatibility with the applicable CIMACT software release. Successful components are included in the approved parts list.A rolling obsolescence management programme ensures the availability of component suites to support existing CIMACT installations and enable the build of new systems.	EUROCONTROL CIMACT
Split	ASTERIX Radar data		An inbound radar data stream can be copied and output with new SIC and SAC codes	GF RADIX RDFC

Release and General Information

Trademarks of Thruput Limited include: TruePixel™ , Graphix Factory™ , MIDAS™ , Towermaster™ and VideoMax™ Thruput Limited operate a policy of continuous improvement and information in this website is subject to change without notice and does not constitute an Offer or a Warranty of any kind.

Navigation

Enquiries &